Dezcal Powder Coffee Machine Descaler – 900g Tub (URN4301)

Dezcal® Powder is a professional-grade activated scale remover that eliminates mineral build-up inside coffee and espresso machines, kettles, and boilers.

Limescale can restrict water flow, reduce temperature stability, and impact taste — Dezcal restores optimal performance without damaging metal components.

This 900g tub is ideal for commercial environments, service engineers, and heavy-use coffee machines. Safe, biodegradable, and phosphate-free, Dezcal can be used for both routine maintenance and deep cleaning.

SINGLE – 1 x 900g Tub
Suitable for use in espresso machines, pod machines, kettles, and hot water systems.

🔹 Key Features

• 900g tub of Dezcal® activated scale remover powder
• Removes limescale and mineral deposits
• Suitable for coffee machines, kettles, and boilers
• Biodegradable and phosphate-free
• Safe for use on all machine metals
• Ideal for commercial and domestic descaling

⚙️ Tech / Usage Notes

🧪 How to Use

For Coffee and Espresso Machines (In-Machine Descaling)

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.
Stir thoroughly until fully dissolved.

Steps

1. Prepare the descaling solution using 28g per 1 litre of warm water. Ensure the powder is completely dissolved before use.
2. Pour the solution into the machine’s water tank or boiler.
3. Run the machine and allow approximately half of the solution to pass through the system.
4. Switch the machine off and allow the solution to sit inside the system for 15–20 minutes.
5. Switch the machine back on and run the remaining solution through.
6. Rinse thoroughly by running at least two full tanks of clean water through the machine to remove any residue.

For Commercial Applications (Boilers Removed Prior to Descaling)

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.

Steps

1. Prepare enough solution to fully submerge the removed boiler or component.
2. Stir until the powder is completely dissolved.
3. Submerge the component in the solution.
4. Allow to soak until scale deposits dissolve.
5. Rinse thoroughly with clean water before reinstalling.

For Soaking Individual Parts

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.

Steps

1. Prepare the solution and stir until fully dissolved.
2. Submerge affected components in the solution.
3. Soak for up to 30 minutes, depending on scale build-up.
4. Rinse thoroughly with clean water before reassembly.