Dezcal Powder Coffee Machine Descaler – 28g Sachet (URN0601)

Dezcal® Powder is a professional-grade activated scale remover that eliminates limescale and mineral build-up inside coffee and espresso machines, kettles, and boilers.

This single-use 28g sachet is pre-measured for one complete descaling cycle — perfect for home users, mobile service kits, or low-volume sites.

Safe for all machine metals, Dezcal restores water flow, improves temperature stability, and helps maintain coffee flavour. The biodegradable, phosphate-free formula makes it a responsible choice for routine machine maintenance.

SINGLE – 1 x 28g Sachet
Designed for single-cycle coffee and espresso machine descaling.

🔹 Key Features

• 28g sachet of Dezcal® activated descaler powder
• Single-use format for one complete cleaning cycle
• Removes limescale and mineral deposits
• Suitable for coffee machines, kettles, and boilers
• Biodegradable and phosphate-free
• Safe for all metal components

⚙️ Tech / Usage Notes

🧪 How to Use

For Coffee and Espresso Machines (In-Machine Descaling)

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.
Stir thoroughly until fully dissolved.

Steps

1. Prepare the descaling solution using 28g per 1 litre of warm water. Ensure the powder is completely dissolved before use.
2. Pour the solution into the machine’s water tank or boiler.
3. Run the machine and allow approximately half of the solution to pass through the system.
4. Switch the machine off and allow the solution to sit inside the system for 15–20 minutes.
5. Switch the machine back on and run the remaining solution through.
6. Rinse thoroughly by running at least two full tanks of clean water through the machine to remove any residue.

For Commercial Applications (Boilers Removed Prior to Descaling)

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.

Steps

1. Prepare enough solution to fully submerge the removed boiler or component.
2. Stir until the powder is completely dissolved.
3. Submerge the component in the solution.
4. Allow to soak until scale deposits dissolve.
5. Rinse thoroughly with clean water before reinstalling.

For Soaking Individual Parts

Dilution Ratio:
Dissolve 28g of Dezcal powder per 1 litre of warm water.

Steps

1. Prepare the solution and stir until fully dissolved.
2. Submerge affected components in the solution.
3. Soak for up to 30 minutes, depending on scale build-up.
4. Rinse thoroughly with clean water before reassembly.